How to program oticon hearing aids

Step-by-step guide for wireless programming Oticon Genie and FittingLINK (WP-2)Step-by-step guide for wireless programmingOticon Genie and FittingLINK (WP-2)Step 1 – Insert the Bluetooth adapter into the desk stand (recommended) or the PC. Ensure that only one Oticon Bluetooth adapter is connected. Wait for the Windows USB driver to be installed.Step 2 – To use the FittingLINK WP-2 neckpiece and the Bluetooth Adapter pairing is needed. Press and hold (5 sec) both the Bluetooth adapter button and the FittingLINK WP-2 ON/OFF button. Both products’ LEDs will start blinking and turn steady when pairedStep 3 – Enter Genie and click on “PREFERENCES” and then “EDIT PREFERENCES”. Go to the “PROGRAMMING DEVICE” tabStep 4 – Press the “DETECT” button and wait for FittingLINK to be detected. When detected click OK.Step 5 – Insert fresh batteries in the hearing aids and place them on each side of the neckpiece at a 5 - 10 cm (2 - 4 in.) distance.tep 6 – Press the “DETECT” button in Genie and follow the screen prompts.Step 7 – Place the hearing aids and the FittingLINK WP-2 neckpiece on the clientTurn off any secondary wireless programming equipment before establishing the bluetooth pairing between the bluetooth adapter and the selected FittingLINK WP-2. It is possible to have only one wireless programmer connected at a time. 

May 30, 2023 - 19:14
 0  20
How to program oticon hearing aids

Step-by-step guide for wireless programming Oticon Genie and FittingLINK (WP-2)

Step-by-step guide for wireless programming

Oticon Genie and FittingLINK (WP-2)



Step 1 – Insert the Bluetooth adapter into the desk 

stand (recommended) or the PC. Ensure that only one 

Oticon Bluetooth adapter is connected. Wait for the 

Windows USB driver to be installed.


Step 2 – To use the FittingLINK WP-2 neckpiece and 
the Bluetooth Adapter pairing is needed. Press and 
hold (5 sec) both the Bluetooth adapter button and the 
FittingLINK WP-2 ON/OFF button. Both products’ LEDs 
will start blinking and turn steady when paired


Step 3 – Enter Genie and click on “PREFERENCES” 
and then “EDIT PREFERENCES”. Go to the 
“PROGRAMMING DEVICE” tab




Step 4 – Press the “DETECT” button and wait for 
FittingLINK to be detected. When detected click OK.


Step 5 – Insert fresh batteries in the hearing aids 

and place them on each side of the neckpiece at a 5 - 

10 cm (2 - 4 in.) distance.

tep 6 – Press the “DETECT” button in Genie and follow 
the screen prompts.


Step 7 – Place the hearing aids and the FittingLINK 
WP-2 neckpiece on the client


Turn off any secondary wireless programming 

equipment before establishing the bluetooth pairing 

between the bluetooth adapter and the selected 

FittingLINK WP-2. 

It is possible to have only one wireless programmer 

connected at a time. 

What's Your Reaction?

like

dislike

love

funny

angry

sad

wow